Fracturing Cross-linker PT LTC-2

— Borate cross-linker
— High resistance to shear stress
— Effective fast-acting (10 sec) borate cross-linker
— Recommended concentration 2.0–4.0 GPT (2.0–4.0 l/m3)
— Wide range of working temperatures as a single cross-linker: 41–140 °F (5–60 °С)
— Possibility of use as an additive improving resistance to shear stress
— pH of cross-linked gel more than 8.3
— Freezing temperature: -25°C

Fracturing Cross-linker PT BCF-9

— Borate cross-linker
— Recommended concentration 1.0–2.0 PGT (1.0–2.0 l/m3)
— pH of cross-linked gel at the range of 10.0–10.8 pH
— Wide range of working temperatures: to 270 °F (to 130°С)
— Freezing temperature: -30°C

Fracturing Cross-linker PT BCD

— Effective delayed (from 30 sec to 3 min in relation to PT BCD modification) borate cross-linker
— Recommended concentration 2.0–4.0 PGT (2.0–4.0 l/m3)
— Wide range of working temperatures: to 270°F (to 130°С)
— Possibility of use as buffer in salt water
— pH of cross-linked gel more than 8.9
— Freezing temperature: -25°C

Fracturing Cross-linker PT DBC-11

PT DBC-11 is a borate cross-linker. It forms easily the cross-links in water gel systems. Cross-linked guar and hydroxypropylguar systems have high viscosity allowing effectively transferring the proppant.

PT DBC-11 represents the dry granulated cross-linker. The unique structure of PT DBC-11 allows getting stable gel at high temperatures without any additives controlling the pH level, which makes it quite accessible and economical.

As a part of a PT DBC-11 there is a temperature stabilizer which ensures safety of large-tonnage frac job.